Description

A python API for the SmartWave interface.

Installation

• This package requires python version 3.

• To install this package, run the following command:

pip install SmartWaveAPI

Usage

It is recommended to use the with..as pattern to implicitly call cleanup functions when resources of the SmartWave device are no longer needed.

Basic I2C script

from SmartWaveAPI import SmartWave

with SmartWave().connect() as sw:
    with sw.createI2CConfig() as i2c:
        # write 0xaa, 0x55 to device with address 0x20
        i2c.write(0x20, bytes([0xaa, 0x55]))
        # read 2 bytes from device with address 0x20
        i2c.read(0x20, 2)
        # write value 0x0f to register 0xaa of device at 0x20
        i2c.writeRegister(0x20, 0xaa.to_bytes(1, "big"), 0x0f.to_bytes(1, "big"))
        # read value of 1-byte register 0xaa of device at 0x20
        i2c.readRegister(0x20, 0xaa.to_bytes(1, "big"), 1)

Basic SPI script

from SmartWaveAPI import SmartWave

with SmartWave().connect() as sw:
    with sw.createSPIConfig() as spi:
        # write 0xaa, 0x55 via SPI and read simultaneously
        spi.write([0xaa, 0x55])